DSH 1000 Table Top Pick & Place
System
The DSH 1000 Table Top Pick & Place system can be
configured for picking devices from a 4" or 6"
wafer film frame and place into waffle/GEL packs or a
tape and reel module. The system can be configured for
picking from JEDEC trays to JEDEC trays. Test and
inspection stations can be added as options. The gantry
motion uses high speed linear motors closed loop to glass
scale encoders for +/- 0.5 mil accuracy.
DSH 3000 Automatic Die Sort Handler
The DSH 3000 answers the requirement for a pick &
place system with a high speed motorized motion and high
accuracy placement to +/- 1.0 mil. All this at a lower
cost and smaller footprint than production systems.
DSH 4000 Tape & Reel Handler
DSH 5000 Die Sort Handler
The DSH 5000 was designed to lead the industry in high
accuracy production pick & place systems. The main
pick & place movement uses a high speed closed loop
linear servo motor for speed and accuracy. The basic
accuracy of the movement is +/- 1.0 mil with the option
of +/- 0.1 mil available. The output of the system is
configured to the customer’s requirements. Custom
trays, waffle/Gel packs, manual load or multiple cassette
indexers, tape & reel indexers, flip chip, film
frames, test and inspection stations, and combinations
are all possible.
High Accuracy Die Attach System
For small volume die attach applications that require
high accuracy in dispense and die attach placement. The
placement accuracy of +/- 0.5 mil is assured due to the
use of high accuracy linear glass scale encoders used
throughout the system.
Die Stacking
System
Based on the
DSH 5000 Handler, the dual head and dual film frame input
system stacks die 60 to 80 die high to within 10-micron
accuracy. The system is capable of handling various die
sizes and wafer thickness. Die as thin as 125 microns
have been stacked into a fixture. The system also
unstacks the die for an inspection operation before
loading into a shipping media.
|
